Shdwdrgn

I would love to have them light up like a scoreboard as each representative takes the floor, showing all of the commandments they have broken. If people want so badly to bring religion into politics then lets just show them exactly who they've been voting for. Maybe we can get the news networks in on this too, displaying it on the side of the screen similar to a sporting event.

Marjorie Taylor Greene, the bastion of factual information, has once again shown the nature of her character by claiming that peaceful protestors at the Capitol are in fact an "insurrection of terrorists". Don't you see all the violence and mayhem being caused in this video clip? No, me either...

If you want to make such bold comparisons, lets start out by checking how many people are running for their lives or the number of deaths involved between these two events. Or maybe we should be asking why MTG thought it was an "honor" to meet with the people responsible for murder and the attempt to destroy our democracy?

I've seen the occasional blip here, but this is the first time I've seen a complete outage of this instance. Hoping @Salamander wanders through and gives us the scoop?

I've spent the past day working on my newest Poweredge R620 acquisition, and trying to nail down what things I can do without checking. Google has shown me that everyone seems to be having similar issues regardless of brand or model. Gone are the days when a rack server could be fully booted in 90 seconds. A big part of my frustration has been when the USB memory sticks are inserted to get firmware updated before I put this machine in production, easily driving times up to 15-20 minutes just to get to the point where I find out if I have the right combination of BIOS/EUFI boot parameters for each individual drive image.

I currently have this machine down to 6:15 before it starts booting the OS, and a good deal of that time is spent sitting here watching it at the beginning, where it says it's testing memory but in fact hasn't actually started that process yet. It's a mystery what exactly it's even doing.

At this point I've turned off the lifecycle controller scanning for new hardware, no boot processes on the internal SATA or PCI ports, or from the NICs, memory testing disabled... and I've run out of leads. I don't really see anything else available to turn off sensors and such. I mean it's going to be a fixed server running a bunch of VMs so there's no need for additional cards although some day I may increase the RAM, so I don't really need it to scan for future changes at every boot.

Anyway, this all got me thinking... it might be fun to compare notes and see what others have done to improve their boot times, especially if you're also balancing your power usage (since I've read that allowing full CPU power during POST can have a small effect on the time). I'm sure different brands will have different specific techniques, but maybe there's some common areas we can all take advantage of? And sure, ideally our machines would never need to reboot, but many people run machines at home only while being used and deal with this issue daily, or want to get back online as quickly as possible after a power outage, so anything helps...

Your dreams and imagination evolved as a view into another universe. As with the current beliefs, you cannot decipher technical information -- no words in books, no details of how devices work, so even if you can describe things you see from another place, you could not reproduce a working version.

Now how do you convince others that the things your are seeing are really happening without being labeled insane? And how could you use this information to benefit yourself or others? Take a peek into the multiverse to see how other versions of yourself have solved these problems...

I have a self-hosted matrix-synapse server up and running on a Debian linux server, but before I open it up I want to at least get a captcha service in place to reduce spamming. The only module I've seen to handle this function appears to require setting up a Google recaptcha though, however I would prefer to keep all of this entirely self-contained for the privacy of my users. Can anyone recommend a module that allows for a local captcha option? For that matter, can anyone also recommend a captcha system that is pretty straightforward to set up (which is compatible with matrix-synapse) and uses basic preinstalled code bases like perl or python?

And while I'm here, I would also like to provide the option of registering with an email address, but I'm having trouble finding any clear how-to pages on this. Seems like that function might be built directly in to matrix-synapse but I'm just not finding anything helpful. Any suggestions?

I'm fairly new to matrix in general, but I have an initial setup running with the homeserver, Element web page, and an IRC bridge, so if I can just nail down the validation part of registrations I'll have what I think is a good starting point to launch from.

I was reading another article which discussed taking measurements of distance stars at 6-month intervals to create a 3D map of their relative positions and direction of movement. This got me to thinking... has anyone proposed 'dropping' stationary satellites outside of Earth's orbital path for continuous monitoring even when our planet is no longer in that spot? It seems like such an arrangement could provide constant monitoring of things that are happening on the far side of the sun, and they could each act as a relay to each other, bringing the signals back around where we could receive them.

It could be fascinating to be able to constantly monitor the path of know comets, or perhaps even to detect large meteors which are safely away from us now but might some day pose a threat. Studies like mapping star positions could rapidly expand with the availability of continuous data feeds, and I'm sure if such a tool were available scientists would come up with a host of new experiments to try.

A couple other things also come to mind. First off is radio telescopes, which can gather more sensitive data by having sensors further apart. Of course in this case they would only be able to peer in two directions unless you set up the array to rotate as a singular ring (which greatly increases the complexity). The other idea was that I know some phenomena are so large that it takes a huge array of telescopes or sensors to even detect them, and something this large could detect truly astounding low frequency events. Throw in some gravity detectors and watch as the waves propagate through our solar system.

I'm just thinking there's a lot of possibilities here and a lot more data could be collected if we could drop four or eight satellites along the way. I would assume the idea has been proposed before, I just didn't know if this is even feasible?

Turns out both grow in my area, and look identical to this when young. Yikes! So based on a post yesterday, I took this outside and sliced it in half. So far it looks promising (I think?) and I'm not dead yet.

This was found growing in a Colorado yard near the base of an elm tree, in an area where there are also rotting cottonwood roots. Altitude is right at 5000 feet. It wasn't my yard so I'm not sure how many days it may have been growing before I picked it today. I have put both halves in the fridge for now, is there any other information I can provide to help identify it?

A full size copy of the inside can be viewed here: http://sourpuss.net/projects/mycology/2023-08-13/IMG_7239.JPG

I run my own email server, and a friend received a compromised laptop from work which resulted in a spam attack from Russia yesterday. Turtle settings saved the days with thousands of emails still in the queue when I saw the problem, however it made me realize that everyone with accounts on my server are local, do not travel, and have no requirement to send emails from outside the country.

I found how to use the smtpd_discard_ehlo_keyword_address_maps setting in postfix to block a CIDR list of IPs, then found a maintained list of IPs by country codes on github. Cool so far, and a script to keep my local list updated was easy enough.

Now the question is, what countries should I be blocking? There are plenty of lists of the top hacking sources, but it's hard to block #2 (the US) when that's where I am located. But otherwise, does anyone have a list of countries they outright block from logging on to their servers? From the above google searches I have 17 countries blocked so far, and in the first 30 minutes already stopped login attempts from three of those countries, so it appears to be working.

Of course I could write a script to parse my logs to see who has already made attempts, but that's what services like fail2ban are for, and I'm just wondering if there are any countries in particular I should directly block? My list so far includes the following: ae bg br cn de hk id in ir iq il kp ng ru sa th vn

The question itself may not be that interesting, but I thought at the very least some folks might be interested in my experience and think about doing something similar themselves. I can post more details of what I did if there is any interest.

First pics of my first pins. I cut slits in the bag on Sunday and saw the first pins appear yesterday morning, now they're growing fast. This clump is already a full inch (25mm) tall, and I have four openings in the bag that are all pinning. I've been misting them a couple times a day but now I'll be working from home until next Monday so I can try to spray them more often.

For anyone who hasn't seen my previous posts, I started out with a very small sample of spawn from ebay just over two months ago. I expanded that out in jars of rye berries and popcorn kernels, and then on July 4th I split a jar between two fruiting bags with pasteurized straw (I also have two bags of blue oysters and opened one of those on Sunday, but no pins from it yet).

This is my first time trying to grow mushrooms so I've been researching and asking questions every step of the way, but so far so good! I also have never tasted oysters before so that will be a new experience too. Now I just have to temper my impatience until it's time to harvest...

[Update] Adding a second pic this morning. This is about 12 hours later and they've grown significantly again. For reference, the bag is about the size of a sheet of paper.

[2nd update] It's been five days now since I opened the bag for fruiting. Here's a pic of what the mushrooms currently look like. As far as what I've read, I expected them to get MUCH larger than this, but with the upturned caps I really believe these are done growing and should have been harvested yesterday (note this image shows the largest clump of the group). Any thoughts?

My first oyster pins appeared today and I've been thinking about humidity control. I have this big tub I made my still air box from and I've been wondering about using it to hold the two fruiting bags I have. I was concerned that maybe the X slices wouldn't get enough fresh air if I covered them, but then I've been worried about keeping up the humidity. Now that I'm seeing some pinning though I'm feeling like the humidity is more important? I live in Colorado, which isn't quite desert but the humidity in the house typically drops below 40% during the day (it's high right now because we've been getting some rain showers).

For reference, my SAB is a typical DIY, made from a large tub with just a couple hand-sized holes cut out. There's not a lot of airflow in that room anyway, and I'm not sure how much fresh air the mushrooms need once they start growing. Of course I realize they won't be able to stay in the SAB too long, I know they'll outgrow the available space, but I'm just thinking for the next few days, or however long it takes them to really fill in.

So, any thought on this? Should I close them up in the box or just leave them in open air?

I have Openfire set up with the monitoring service plugin which we have been using with Pidgin on the desktop. One of the things I've noticed is that when I sign in to another computer on the same account, I do not get a history of recent messages (which I thought the monitoring plugin was supposed to provide).

The other thing that doesn't seem to be working right is when I am logged in to two computers simultaneously (using the same account). I expect to see chat messages showing up on BOTH devices so I can go between machines, which again is something I thought the monitoring plug was supposed to provide.

The settings I believe are related are under "Offline messages" which I have set to always store, and retain for up to 30 days. Should I bee looking for anything else?

I have been using Pidgin with XMPP on Google for years, so I know both the XMPP protocol and the Pidgin client are capable of handling this functionality. I've been digging around trying to find a solution, and see a lot of things claiming Pidgin is the culprit here, but those messages are a decade old. I can't seem to find any information on the subject for Openfire newer than about 2016.

I'm hoping there's a setting I need to change or another plugin I need to add to get both of these features working on my server? I really love the software otherwise but this seems like a really basic function that should just work, and I am hoping someone can point me to whatever I'm missing.