cyberwolfie

I've been using the web clients of Proton Mail and Drive for a long time in Librewolf. Today it suddenly is stuck on the "Loading Proton Mail..." screen, getting no where. Still works in regular Firefox. Tried disabling both uBlock Origin and NoScript for the tab in case some settings there suddenly were changed, but did not help.

This is very frustrating.

EDIT: After a second reboot it now works again. Unsure why it took two reboots, I'm glad it works.

I am running Godot 4.3 on Linux on a laptop with an NVIDIA RTX3050 Ti latop that I can enable through NVIDIA prime-select. When I have this enabled (not on-demand mode), Blender and games launched through Steam have no issue using the NVIDIA card, but Godot still uses the integrated Intel chip.

Is there an easy way to force Godot to switch device?

EDIT: I didn't get the Flatpak working, but instead running the executable downloaded from godotengine.org, it now works.

I want to mirgrate my Nextcloud instance from a VPS to server in my home. I run the Nextcloud AIO Docker container, which uses Borg backup. The backup repo is about ~70 GB.

How would I best go about transferring it? Is using scp a good solution here (in combination with nohup so that I don't have to keep my ssh session active)? Or is there some other best practice way of doing this?

I switched to Linux about 1.5 years ago now when replacing my old Macbook Pro with a Tuxedo Infinity Book. I am super happy with the transition, and for the most part my digital life has severely improved as a result of it. There's one thing in particular though that I haven't fully grasped or understood despite all the talk about it, and that really has mostly caused confusion on my part, and that is Xorg/X11 (I don't know the difference...) vs. Wayland.

I started out with Tuxedo OS 1 and 2 running KDE Plasma 5.x.x, and thus have been on X11 for the most part since switching to Linux. I never dared switching to Wayland myself. However, they somewhat recently started offering optional upgrades to Tuxedo OS 3 running KDE Plasma 6 where Wayland is the default, and I took the plunge. The only real difference I noticed was small annoyances that I had to fix. Glitching windows running on XWayland and having to configure some .desktop-files to force apps to launch natively in Wayland. Apps not showing the correct desktop icons but the generic Wayland logo instead, making Alt+Tabbing a bit more difficult because it is harder to tell applications apart. Annoying smooth scrolling (I don't want scrolling to have as much friction as polished ice) activated in all kinds of applications that I seem to have to turn off individually. Nothing breaking (though I haven't dared booting with my Nvidia dGPU yet in fear of breaking something irreversibly...), but I haven't noticed any improvements either, and I find it a bit frustrating not knowing where to make the necessary changes and always having to search for it seemingly on a case by case basis.

Now for instance I was updating FreeTube to a new version, and the flags I previously added to the ́.desktop'-file suddenly doesn't work anymore (--enable-features=UseOzonePlatform,WaylandWindowDecorations --ozone-platform-hint=auto). The application won't launch unless I remove them, but then it launches under XWayland instead. Not that I have any issues so far running it like that, but I guess I would prefer to run everything natively in Wayland if I can.

I am currently in the process of finally getting rid of my Meta-account. In the process I have requested data extraction. The media stuff was made available pretty quickly, but the data logs are still being processed. Does anyone know what data they actually contain, and whether there's any point in waiting for it?

The reason I ask is that I also recently got a notification saying that will soon train their AI-model on my data which they will use the "legitimate interest" bullshit to do. I want to have my account deleted by the time this will be phased in (towards the end of June).

So now I am in the dilemma of waiting for the data logs to complete (which I don't know how long will take) or just delete my account in hopes that it will be purged before the AI-stuff goes into effect. I am unable to find out exactly what these data logs consists of and whether there is any point in keeping onto them for whatever reason.

Now, whether I can trust that they actually delete the data is another matter, but at least I would've done what I can, and they would break the law if the retain the data after my deletion request (under GDPR).

I have a specific issue I want to solve right now, but the topic is phrased more generally as I would love the answer to this as well. But this might be an XY-problem because of this, so here's the actual problem I want to solve:

I am using LibreWolf as my main browser, and it has WebGL disabled by default to avoid fingerprinting. I would like to keep it this way, but I am currently also making some internal tools for myself that requires WebGL (map renders with Plotly in Dash).

Is there a way to tell LibreWolf to enable WebGL only for specific sites, so that I don't have to manually toggle this when I want to look at my maps? My initial thought was that this could be solved with a site-specific about:config.

I have previously written a lot of code that is hosted on a public repo on GitHub, but it never had a license. It was written as part of my work while working for a non-commercial academic entity, and I would like to add a license before the link to the repo will be included in something that will be made public, potentially attracting one or two visitors.

This leaves me with a couple of questions:

1. Can I just add a license after the fact and it will be valid for all prior work?
2. Do I have to make sure the license is included in all branches of the repo, or does this not matter? There are for instance a couple of branches that are used to freeze the state of code at a certain time for reproducibility's sake (I know this could be solved in a better way, but that's how it is).
3. I have myself reused some of the code in my current work for a commercial entity (internal analysis work, only distributed within the organization). Should this influence the type of license I choose? I am considering a GPL-license, but should I go with (what I believe to be) a more permissive license like MIT because of this?

I've been having some issues with my network card on my new Minisforum UM690S. The issue is related to both WiFi and Bluetooth, but seeing as I have now a cabled connection for internet (and it will stay that way), I am really just in need of solving this for the Bluetooth-issue. I've been trying to figure out how to solve this using iwconfig and hciconfig, but so far I am coming up empty with a concrete solution.

The problem: The Bluetooth signal strength seems to be very poor. The computer is in a cupboard under my TV, with a wooden panel blocking the line of sight (this will need to stay closed). I use a Bluetooth keyboard with mousepad, and otherwise I connect game controllers when I want to play games. If I am close enough to the machine, especially the controllers work just fine while the keyboard is a bit wonky, but when I am in my couch (about 3 m / 10 ft away), the keyboard stops working and the game controllers are behaving mad. There will be many lines in dmesg reporting from the controller that says something like "compensating for 27 dropped IMU reports". This is a big problem for me, because the computer's main function is as an entertainment station where I will spend 99% of my time using the computer in the couch.

The keyboard has been used with no problems with a previous computer at the same distance, never had any issues with it then. I also had a similar issue with my WiFi - when the computer was temporarily placed in a room further from my WiFi hotspot, the dl/ul speeds were extremely slow. Moving the computer much closer to the hotspot fixed this issue.

I suspect the root of the issue is the low transmitting power, which for WiFi is reported to be 3 dBm (output from iwconfig). My laptop outputs 22 dBm, and the previous computer would output the same (if not 20 dBm). I don't understand the output that hciconfig inqtpl yields, but the number following "TX bytes" is significantly lower than on my laptop. I think I need to change this, but I am not entirely sure how and to what, and if it is even a good idea to mess around with this.

Some relevant (?) output: Let me know if there are other output that can be helpful in diagnosing / fixing the problem.

$ inxi -Fxpmrz
...
Network:  
    Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter.
        driver: mt7921e v: kernel bus-ID: 03:00.0
...
Bluetooth:
    Device-1: MediaTek Wireless_Device type: USB driver: btusb v: 0.8
        bus-ID: 5-3:2
    Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
        bt-v: 3.0 lmp-v: 5.2

$ hciconfig inqtpl
hci0:        Type: Primary    Bus: USB
             BD Address: XX:XX:XX:XX:XX:XX    ACL MTU: 1021:6    SCO MTU:  240:8
             UP RUNNING PSCAN
             RX bytes:12353226  acl:217808  sco:0  events:496   errors:0
             TX bytes:10815  acl:145   sco:0    commands:193  errors.0

$ iwconfig
wlan0            IEEE 802.11   ESSID:"MyNetwork"
                 Mode:Managed    Frequency: 5.5 GHz   Access Point: XX:XX:XX:XX:XX:XX
                 Bit Rate=780 Mb/s   Tx-Power=3 dBm
                 Retry short limit:7    RTS thr:off      Fragment thr:off 
                 Power Management:off
                 Link Quality=70/70    Signal level=-32 dBm
                 Rx invalid nwid:0   Rx invalid crypt:0    Rx invalid frag:0
                 Tx excessive retries:0     Invalid misc:0       Missed beacon:0

I am trying to set up KDE Connect between a machine running Linux Mint and my Android-device. It does not show up, and it turns out I don't receive any response if I ping it, and I have the same issue trying to ping the machine from my Android device (from Termux). I've tried two different Android devices, but no luck.

This is not an issue with two other machines I have. Both have KDE Connect setup and I can ping the phone just fine, and I can also ping from the phone. They're all connected to the same VLAN. I can also ping from this machine to the other machines. ufw is disabled.

What could be the issue here?

EDIT: Connection established suddenly after installing and running iptraf.

I'm trying to connect my Wiimote via Bluetooth to a new Minisforum UM690S running Linux Mint 21.3. I'm using this post from the ArchWiki as a reference, and I am fully able to do this successfully on my laptop (running Tuxedo OS 2) and another mini-PC running Pop_OS!

I use the Bluetooth Devices-menu in Linux Mint to do this. The Wiimote is discoverable, and I get a message saying it is connected. However, the four, blue LEDs keep flashing (although they keep doing so which indicates that there is some kind of connection), and it does not show up in the device list in e.g. Dolphin Emulator. I've installed xwiimote, but it is not listed when running xwiishow list. On my other machines, it instantly shows up here. I have tried this both with or without running sudo modprobe hid-wiimote prior to connection attempt.

On my other machines, it is paired immediately after trying to connect. Then only the first light is turned on, and is permanent. If I try to right-click and click "Pair", I sometimes get a prompt to authorize the device with a PIN. This results in a line in the dmesg-output that reads Bluetooth: hci0: ACL packet for unknown connection handle 3837. The ArchWiki-article says that this would indicate that the wiimote-plugin is not included in BlueZ, but I have confirmed that it is by running grep wiimote /usr/lib/bluetooth/bluetoothd which yields the output grep: /usr/lib/bluetooth/bluetoothd: binary file matches.

I am not sure where to continue troubleshooting now. Any ideas?

I just ordered a barebones Minisforum UM690S and am currently trying to find some RAM-chips and an SSD to put in it, but apparently these RAM-chips were a bit more complicated than I had imagined.

It runs an AMD Ryzen 9 6900HX, which on its site says it supports DDR5-RAM up to 4800 MHz. On the Minisforum spec page, it also says that it uses the SODIMM form factor.

So my questions:

1. Am I bound to 4800 MHz? Could I go for 5600 MHz and accept that I won't get to utilize the full power? Minisforum sales rep says I should get 4800 MHz, but I've also read that higher is OK, it is just wasted. In my case, I can get 5600 MHz cheaper.
2. The sales rep also specifically stated CL40. I can't see that elsewhere, neither on the AMD-site nor Minisforums spec page. From my preferred retailer, I can either get 4800 MHz with CL38, or 5600 MHz with CL40. But not the stated combo of 4800 MHz and CL40. What are my choices here?

The specific chips I am considering are the Kingston FURY Impact-chips:

• Kingston FURY Impact DDR5 4800MHz 32GB, CL38 (38-38-38)
• Kingston FURY Impact DDR5 5600MHz 32GB , CL40

I am lost 🫠

I have a Python-package that calls Inkscape as part of a conversion process. I have it installed, but through Flatpak. This means that calling inkscape does not work in the terminal, but rather flatpak run org.inkscape.Inkscape. I need the package to be able to call it as inkscape.

What is the best way to go about this?