Fribbtastic

joined 1 year ago
[–] [email protected] 14 points 2 weeks ago (1 children)

Short answer: Because their motivation is to win!

I read something about this in the Book "Introduction to Game Design, Prototyping, and Development: From Concept to Playable Game With Unity and C#" by Jeremy Gibson a while ago, maybe that can explain this a bit.

Basically, every Player has some Intention or the "Player Intent" which is described by the Personality Types of Richard Bartle. For example, you have:

  • The Achiever who seeks to get the highest score in the game and wants to dominate it
  • The Explorer who seeks to find all the hidden places in the game and wants to understand the game
  • The Socializer wants to play the game with friends and wants to understand other players
  • The Killer who wants to provoke other players and wants to dominate them

And then you have two others that you will be encountering:

  • The Cheater who only cares about winning and does not care about the integrity of the Game and they will bend or break the rules to win
  • The Spoilsport who doesn't care about winning or about the game but rather will break the game to ruin the other player's experience

So, the motivation to "cheat" could either be that this player doesn't really care about the game, is able to get away with cheating and just wants to beat the game. According to Jeremy Gibson, a cheater might not cheat if they can win legitimately but I would argue that cheaters are usually not great players in the first place so the bar would be pretty low for them to "win legitimately".

As for the spoilsport, this is extremely hard to work against or prevent because the motivation isn't about the game anymore but other players, to make their experience miserable so that the spoilsport can gain satisfaction from it. Hence also the use of "don't feed the trolls".

With that being said, when you ask why someone would cheat, the question would rather be "What is their motivation" and the answer to that is "to win the game, at all costs". And, most of the time, they will get away with this because they apparently cannot be caught as quickly as they can still continue doing it, if there is any action against them at all.

[–] [email protected] 6 points 3 weeks ago

Wrote this in a different thread but the way PlayStation handles this...

Password reset is limited to 30 characters. Login isn't.

That would be fine if the password rules on reset would actually mention this and not just cut off the password at 30 characters without telling you that it is too long. So I generated the password used that on reset, saved it, login wrong...

I couldn't login to my PlayStation account because my 32 characters long password saved in my bitwarden vault wasn't correct.

Even worse, on the first support request I was basically told "looks fine on our side, bye".

[–] [email protected] 25 points 3 weeks ago (1 children)

I totally agree. I had it a few times in which someone calls me, rips me out of my thoughs, we discuss something, hang up and I have nothing retained from what we talked about. Or, even better, someone says something on a call and I do that and then they never said anything about that.

Even worse, I can't listen to the conversation in 1-2 weeks because that is the time I could actually work on it and remember every detail that we talked about.

Now I am strictly going with emails. Sure they can call me and we talk about the feasibility or discuss possible solutions but any request for implementation has to happen either over an email of which I then create a ticket/issue or they create one directly themselves.

That way I can prove that what I implemented was based on what was requested and if that was wrong then the request wasn't clear enough.

[–] [email protected] 0 points 1 month ago

Mountain Man: 10 Books by Keith C. Blackmore. Basically, the Zombie Apocalypse happens and a Dude tries to survive alone, physically, mentally and emotionally while also trying to go on supply runs, running into Zombies and generally trying to stay alive while coping with everything. I think it would be good to have some other zombie-related Series that isn't The Walking Dead.

Expeditionary Force: 18 Books by Craig Alanson. Earth and Humanity are attacked by Hamster Aliens, another alien Race, Lizards, who attack the hamsters saving Earth in the process and then recruiting Humanity into a war on a galactic scale but the Hamsters aren't the real enemy of Humanity. I'm only at the end of the 5th Audiobook but they are great and I would really wish Skippy is voiced by the Audiobook Narrator R.C. Bray in a TV adaption.

Kyralia series: Been a while since I read it but a fantastic series related to magic By Trudi Canavan, I think there are just not enough good Magic-related Shows.

Tales of the Otori: A 5-Book Series by Lian Hearn is set in a fictional feudal Japan. The Main story follows a Boy, Takeo, through his life to avenge his adoptive father and escape the legacy of his biological father. Probably the only series in which I had to put down the book at one point and just had to process what was happening.

[–] [email protected] 3 points 1 month ago (1 children)

You are in the Anime Community, you should ask in a Manga related Community instead...

[–] [email protected] 1 points 1 month ago

I tried it but it doesn't seem to work for me correctly or maybe I am doing something wrong. I patch the YouTube app and install it but as soon as I close and open it, all the changes made by the patch are apparently gone. Shorts that are hidden on the first start after the patch are visible again, ads seem to be reduced but still happen occasionally.

I disabled the default YouTube app, gave the patched version a different name, disabled auto update, repatched it but nothing seems to stick after opening it again.

And then the whole "I have to download the apk so that I can use it" because I don't have rooted my phone is just inconvenient.

I stick with my yt-dlp server and Plex instead.

[–] [email protected] -1 points 1 month ago* (last edited 1 month ago)

It goes even beyond that.

With a dedicated app, you go into the store and install it and then you have it in your apps that you then can place everywhere.

With a website, you need to have the browser, navigate to that website each time. And yes, you could put a link to that website on your home screen as well but not many user are probably aware of that being an option.

I know that but I still would prefer a dedicated app because it is easier to manage and use more features of my phone. For example, I just tried it on my android phone and the link to a website always opened a new tab in my Firefox.

Then I can manage the notifications of that app depending on what I want it to notify me about.

I can't do that specifically for a single app or website in a browser.

On the other hand, I also wouldn't want to miss a website because I am not always on my phone and, in some cases, it is way more annoying to do something over the phone because I am just not used to it (like writing this comment). Doing that over a website version that I can access on my PC is much easier and convenient.

[–] [email protected] 32 points 1 month ago (3 children)

It's a bit of an infuriating story that I had not so long ago.

I have a Playstation account and I recently wanted to log into that account on the PlayStation website. The Password I had saved in my Bitwarden Password Manager was apparently wrong. Okay, then I will just reset it, that's fine.

I went through the Password reset process and generated a new Password, pasted it into the Password field and sent it and everything was fine. I tried to log in with that password and was told that the username or password was wrong. Okay, that is weird, since I reset the password just now the login name couldn't be wrong because, well, I just used that for the reset.

I tried that several times with the same result and gave up.

A few months later, I wanted to try again and had the same problem. I wanted to sort that out so I went through the same process with the Support bot yet again which then told me that I should come back in the "office hours". A company making 84 billion in revenue should be able to employ 24/7 customer service or at least tell me that when I request support and not let me go through the bot again.

So, I waited for the customer service personnel to be available and told them my problem. There I was told that "everything was looking fine on their end" and they quickly ended the support. I mean, yes, I was angry but wasn't abusive to that person because if you couldn't help me what should I do with my account, it also definitely wasn't their specific fault. But I would, at least, have expected more than "Well, works on our end, sucks for you, bye".

The next time I tried again and got a more competent Support dude and we ran through the same troubleshooting steps as before. Reset password (even though I just did that, again, through the bot), logged in again and failed again. This time they suggested that I could use a "normal" password that I don't generate. THAT worked for some reason.

All of my generated passwords in Bitwarden are up to 32 long with all possible characters, depending on what the website allows or expects. If a website, for example, doesn't allow 32 characters, I adjust and shorten it to the maximum length they allow. That worked without issues so far.

Well, turns out that the field that you use to reset your password has a character limit of 30 characters. But, this would be fine if the dialogue tells you that your password is too long, but it doesn't. It just cuts off at 30 characters and happily saves that.

However, the Password field that you use to log in doesn't have that restriction.

This means that you reset your password with a 32-character long generated password, which is saved in your vault, PlayStation saves a 30-long password and then you use the 32-long password to log in, which fails because it isn't the same.

And this isn't even mentioned in the password guidelines. It only said "min 8 characters" but not the maximum.

[–] [email protected] 2 points 1 month ago* (last edited 1 month ago)

I think that it is healthy for a discussion or an argument to have both positive and negative points of view. I also will voice my opinion regardless of the standpoint of the initial question.

However, this also depends on the context. I won't go into each thread and post something negative just because I don't like the post or thread. But if someone is asking for an opinion then they should expect that the opinion of others might not be positive or align with their own opinion at all.

I always hate to see those "yes" posts in which every criticism is being downvoted or "banned" but I also hate to see those rants/vent posts just for the circlejerk of hate or negativity.

[–] [email protected] 2 points 1 month ago

Currently listening to "zero hour" from the expeditionary force by Craig Alanson. R.C. Bray is such a great narrator and "Skippy" is always cracking me up.

[–] [email protected] 24 points 1 month ago* (last edited 1 month ago)

There is also an interesting video by tasting history about this: https://youtu.be/-Y_TWPbmiRE

IIRC these even used the guide in a world war because of how good the maps in it were.

[–] [email protected] 2 points 1 month ago (1 children)

The problem with brushing on resin is actually not that great because resin for printers will need to be cured. Unless that material is letting the UV light through, only the outer parts will get cured and hold onto the models but when you open it up again the whole middle part would be liquid resin again which stinks and is toxic.

I had this misunderstanding for quite a while myself and though that I can just weld resin party with resin together until I did that with a larger piece and it broke quite easily and seeing that the whole inside wasn't even touched at all by the UV light.

Hence also why you should shine some UV light into a hollowed model to fully cure it.

CA/superglue should do fine if applied correctly.

 

I have an Ender 5 Plus with some upgrades ("Old" MicroSwiss Direct Drive, Exoslide XY, custom shroud) and I occasionally have the issue in which the Cables for the Print head as well as the Filament Feeding Tube interfere or get caught on something on the printer.

The most recent example was when I printed (or wanted to print) something and in the middle of the night I woke up and checked up on it and it had a layer shift. Turns out that the filament feeding tube got caught in the X belt of the exoslide and prevented it from moving properly.

I already printed some brackets for the cables on the backside to the print head but the tube is still fairly unstable and flopping over after some time. The same with the filament feeding tube, since they are delivered in a spiral they are fairly fixed in that position and while I could and now have oriented it into a position that it wouldn't get caught, I need a more permanent solution.

What I am looking for is something to keep the cables upright, maybe even some "boom arm" that has some clips on it that pull/hold the cables up but also not as tight so that it interferes with anything...

Here is an image of my Printer. which pretty much shows the issue.

view more: next ›