BrazenSigilos

cross-posted from: https://lemmy.world/post/19745956

What is a Yocan Torch?

Introduction If you are a fan of vaping, then you may have heard of the Yocan Torch. This device is a portable e-nail that allows you to vaporize your favorite concentrates on the go. It is a popular choice among vaping enthusiasts because of its convenience, portability, and ease of use. In this article, we will take a closer look at what the Yocan Torch is and how it works.

What is a Yocan Torch? The Yocan Torch is a portable e-nail that is designed for use with concentrates such as wax, shatter, and oil. It is a small, handheld device that is powered by a rechargeable battery. The Torch is made up of two main components: the battery and the atomizer. The battery is the power source for the Yocan Torch. It is a rechargeable battery that can be charged using a USB cable. The battery has a capacity of 1100mAh, which is enough to provide several sessions of vaping before it needs to be recharged. The atomizer is the part of the Yocan Torch that heats up the concentrate and turns it into vapor. The atomizer is made up of a quartz dual coil (QDC) and a glass tube. The QDC is the heating element that heats up the concentrate, while the glass tube is where the vapor is produced.

How does the Yocan Torch work? To use the Yocan Torch, you first need to charge the battery. Once the battery is fully charged, you can attach the atomizer to the battery. To do this, simply screw the atomizer onto the battery until it is firmly in place. Next, you need to load your concentrate into the atomizer. To do this, remove the glass tube from the atomizer and place a small amount of concentrate onto the QDC. Be careful not to overload the atomizer, as this can cause it to clog and reduce its effectiveness. Once you have loaded your concentrate, replace the glass tube and turn on the Yocan Torch by pressing the power button five times in quick succession. The power button is located on the front of the battery and is marked with a Yocan logo. The Yocan Torch will begin to heat up the concentrate, and you will see vapor start to form inside the glass tube. To inhale the vapor, simply place your mouth over the mouthpiece at the top of the glass tube and inhale.

Conclusion The Yocan Torch is a convenient and portable e-nail that is perfect for vaping concentrates on the go. Its compact size and ease of use make it a popular choice among vaping enthusiasts. If you are looking for a reliable and efficient way to vaporize your favorite concentrates, then the Yocan Torch is definitely worth considering.

cross-posted from: https://ttrpg.network/post/7528051

It's disappointing that copyright infringement could cause these people to spend time in prison, but the predatory practices of the companies they where competing with are punished with no more then fines. A "cost of doing business" for the corporate aristocrats. This is the threat the upper class uses on the rest of us, and all too often do not suffer themselves.

"Rules for thee, but not for me" - Corporations

It's disappointing that copyright infringement could cause these people to spend time in prison, but the predatory practices of the companies they where competing with are punished with no more then fines. A "cost of doing business" for the corporate aristocrats. This is the threat the upper class uses on the rest of us, and all too often do not suffer themselves.

"Rules for thee, but not for me" - Corporations

It's disappointing that copyright infringement could cause these people to spend time in prison, but the predatory practices of the companies they where competing with are punished with no more then fines. A "cost of doing business" for the corporate aristocrats. This is the threat the upper class uses on the rest of us, and all too often do not suffer themselves.

"Rules for thee, but not for me" - Corporations

cross-posted from: https://ttrpg.network/post/4222671

Want a 3D printer in New York? Get ready for fingerprinting and a 15 day wait

Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]

I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL."

This isn't even going to stop any crimes from happening, for pity sakes regular guns end up in criminal charges all the time, regardless of background check laws. How about some real change and effective measures, rather then virtue-signaling and theater illusion for a constituency?

cross-posted from: https://ttrpg.network/post/4222671

Want a 3D printer in New York? Get ready for fingerprinting and a 15 day wait

Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]

I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL."

This isn't even going to stop any crimes from happening, for pity sakes regular guns end up in criminal charges all the time, regardless of background check laws. How about some real change and effective measures, rather then virtue-signaling and theater illusion for a constituency?

cross-posted from: https://ttrpg.network/post/4222671

Want a 3D printer in New York? Get ready for fingerprinting and a 15 day wait

Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]

I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL."

This isn't even going to stop any crimes from happening, for pity sakes regular guns end up in criminal charges all the time, regardless of background check laws. How about some real change and effective measures, rather then virtue-signaling and theater illusion for a constituency?

cross-posted from: https://ttrpg.network/post/4222671

Want a 3D printer in New York? Get ready for fingerprinting and a 15 day wait

Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]

I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL."

This isn't even going to stop any crimes from happening, for pity sakes regular guns end up in criminal charges all the time, regardless of background check laws. How about some real change and effective measures, rather then virtue-signaling and theater illusion for a constituency?

Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]

I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL."

This isn't even going to stop any crimes from happening, for pity sakes regular guns end up in criminal charges all the time, regardless of background check laws. How about some real change and effective measures, rather then virtue-signaling and theater illusion for a constituency?

I was introduced to the potential for ADHD as an adult, and now at 33 I have my official diagnosis! Severe ADHD / Innatentive Presentation I've never been relived to get a diagnosis of severe anything before, but I feel like I can finally feel sure about why I've struggled with these symptoms for so much of my life. Now I can start learning how to deal with and accommodate my symptoms, rather then trying to wrestle this many-limbed thing in the dark of ignorance.

If this is meant to be elsewhere, please let me know. I once read a story about a soldier who was in a horrific assault, who was then grafted into a large battle mech. As the story goes on, more flesh is taken until eventually only a spinal column and brain are left inside a gel-sack, and the machine has been upgraded to the point that it now has a super-punch that is powered by artillery shells in the shoulder. Some search engines showed alot of similar stories, but I can't find the right one. Anyone know this tale by title?

Right, so at a glance alot of the posts here are for FDM printing, and while I love my Ender 3 and have no problems with it (anymore...) I really want to get into resin printing. I have a 2 year old Elegoo Mars 2 Mono that I've used a handful of times, because each time I try to print a test model instead of something that looks like a chess piece, all I get is a circle of solid resin about the thickness of a US quarter. I'm kinda discouraged by this, since I know plenty of people get into resin printing and love the level of detail they can get on it. Yes, I know I can get similar details with FDM, and sometimes I do, but I want to expand my printing horizons as well. I've tried printing at different ambient temperatures, reslicing the model with different slicers, and warming the resin before use, but I can't seem to get more then a disk from my printer. Does anyone have some advice or insight into this issue?