From what I understand OP's images aren't the same image, just very similar.
lemmyvore
short of all using the same wordpress or whatnot hoster, that is.
That's the thing, that's common practice. It's basically a given nowadays for shared web hosting to use one IP for a few dozen websites, or for a service to leverage a load/geo-balancer with 20 IPs into a CDN serving static assets for thousands of domains.
with infrastructure the size of twitter you can also blackhole their whole IP range
Just one note, services the size of Twitter typically use cloud infrastructure so if you block that indiscriminately you risk blocking a lot of unrelated stuff.
You should be able to export both contacts and texts if the backup app is given contacts permission and to be set as the text app temporarily.
Not sure about the text multimedia. If it's in the system text database it can be exported, if the Messages app has it in its private data then tough luck.
Well you can probably still back it up to Google.
Also, it's established practice for workers to stagger their off days across the week.
This way both the company and things like services, banks, stores etc. can be available 7 days a week without any undue pressure.
So they're already well positioned to take advantage of flexible working time.
I wanted to run my VPN/Tailscale setup past you, see if anybody has suggestions on how I could do things better.
- Setup: home LAN (
10.0.0.0/24
), router+DNS on10.0.0.1
, server running docker containers on10.0.0.2
. - LAN DNS points
*.local.dom.tld
to the server, public DNS points*.dom.tld
to my dynamic public IP. - Containers run in bridge mode with host, expose ports on host IPs via "ports:" mapping.
- NPM with LE certs also in container, exposes
10.0.0.2:443
, forwards to various other services.
Goals for Tailscale:
- Accessing HTTP services via NPM from my phone when away from home.
- Exposing select UDP and TCP non-HTTP services such as syncthing (:22000) or deluge RCP admin (:58846) to other tailnet devices or to phone on the go.
Goals in general:
- Some containers need to expose ports on the LAN.
- Some containers need to expose ports via Tailscale.
- Some containers need to broadcast on the LAN (DLNA stuff) – but I don't want them broadcasting to Tailscale.
- Generally speaking I'd like to explicitly control what's exposed from each container on either LAN or Tailscale.
- I'd like to avoid hacking images with Dockerfile. I can make my own images to do stuff, just don't want to keep up with hacking other images.
How I progresed with Tailscale:
- First tried running it directly on the host. Good: tailnet IP (let's call it
100.64.0.2
) available on the host's default network stack. Containers can use "ports:" to map to100.64.0.2
(tailscale) and/or10.0.0.2
(LAN). Bad: tailscale would mess with/etc/resolv.conf
on host. Also bad: tailscale0 on host picked up stuff that binds to0.0.0.0
. - Moved tailscale to a container running on the host network stack (
network_mode: host
). Made it leave/etc/resolv.conf
alone. tailscale0 on host stack still picks up everything on0.0.0.0
.
This is kinda where I'm stuck. I can make the tailscale container bridged which would put the tailscale0 interface inside the container. It wouldn't pick up 0.0.0.0
from host but how would I publish ports to it?
- The tailscale recommended way of doing it is by putting other containers in the tailscale's container network stack (
network_mode: container:tailscale
). This would prevent said containers from using "ports:" to map to host anymore. Also, everything they publish locally would end up on tailscale0 whether I like it or not. - Tailscale has an env var TS_DEST_IP that can mirror another IP. I could allocate an IP on host eth0 like
10.1.1.1
, mirror that from the tailscale container, and target it from other containers explicitly with "ports:" when I want to publish a port to tailscale. Downside:10.1.1.1
would be in the host's network stack so still picks up0.0.0.0
. - I could bridge the tailscale container with other containers on a private subnet, say
192.168.1.0/24
and usetailscale serve
to forward specific ports to other containers over that subnet. Unfortunatelyserve
is fairly limited; it can't do UDP and technically it refuses to forward TCP either to non-localhost (but you can dump the serve config to JSON, and hack that config, and use it withTS_SERVE_CONFIG=
🤮). - I could bridge tailscale with other containers and create a special container with a fixed IP on that subnet, mirror the IP from tailscale, and use iptables on that container to forward specific ports to other containers. This would actually solve everything I want except...
- If I ever want to use another VPN which doesn't have the mirror feature. I don't know how I'd deal with that.
I'm posting this in selfhosted because Gandi increasing prices actually helped me a lot with being more serious about selfhosting, made me look into things like DNS and reverse proxies and VPN and docker and also ended up saving me money by re-evaluating my service needs.
For background, Gandi.net is a large and old (25 years) domain registrar and hosting provider in the EU, who after two successive rounds of being acquired by investment funds have hiked up prices across the board for all their services.
In July 2023 when they announced the changes for November I was using their services for pretty much everything because I manage domains for friends and family. That means a wide selection of domains registered with them (both TLDs and European ccTLDs), LAMP hosting, and was taking advantage of their free email hosting for multiple domains.
For the record I don't hold the price hike against them, it was just unsustainable for us. Their email prices (~5€/mailbox/mo) are in line with market prices and so are hosting prices. Their domain prices are however exaggerated (€25-30/yr is their lower price now). I also think they could've been smarter about email, they could've offered lower prices if you keep domains registered with them. [These prices include the VAT for my country btw. They will appear lower in USD.]
What I did:
Domains: looked into alternative registrars with decent prices, support for all the ccTLDs I needed, DNSSEC, enforced whois privacy, and representative services (some ccTLDs require a local contact). Went with INWX.com (Germany) and Netim.com (France). Saved about €70/yr. Could have saved more for .org/.net/.com domains with an American registrar but didn't want to spread too thin.
DNS: learned to use a dedicated DNS service, especially now that I was using multiple registrars since I didn't want to manage DNS in multiple places. Wanted something with support for DNSSEC and API. Went with deSEC.io (Germany) as main service and Bunny.net (Slovenia) as backup. deSEC is free, more on Bunny pricing below. Learned a lot about DNS in the process.
Email: having multiple low-volume mailboxes forced me to look into volume-based providers who charge for storage and emails sent/received not mailboxes. I've found Migadu (Swiss with servers in France at OVH), MXRoute (self-hosted in Texas) and PurelyMail (don't know). Fair warning, they're all 1-2 man operations. But their prices are amazing because you pay a flat fee per year and can have any number of domains and mailboxes instead of monthly fees for one mailbox at one domain. Saved €130/yr. Learned a lot about MX records and SPF/DKIM/DMARC.
Hosting: had a revelation that none of the webpages I was hosting actually needed live dynamic services (like PHP and MySQL). Those that were using a CMS like WordPress or PHP photo galleries could be self-hosted in docker containers because only one person was using each, and the static output hosted on a CDN. Enter Bunny.net, who also offer CDN and static storage services. For Europe and North America it costs 1 cent per GB with a $1 minimum/mo, so basically $12/yr since all websites are low traffic personal websites. Saved another €130/yr. Learned a lot about Docker, reverse proxies and self-hosting in general.
Keep in mind that I already had a decent PC for self-hosting, but at €330 saved per year I could've afforded buying a decent machine and some storage either way.
I think separating registrars, DNS, email and hosting was a good decision because it allows a lot of flexibility should any of them have any issues, price hikes etc.
It does complicate things if I should kick the bucket – compared to having everything in one place – which is something I'll have to consider. I've put together written details for now.
Any comments or questions are welcome. If there are others that have gone through similar migrations I'd be curious what you chose.
I'm thinking of putting all my email archive (55k messages, about 6 GB) on a private IMAP server but I'm wondering how to access it remotely when needed.
Obviously I'd need a webmail client but is there any that can deal with that amount of data and also be able to search through To, From, Subject and body efficiently?
I can also set up a standalone search engine of some sort (the messages are stored one per file in regular folders) but then how do I view the message once I locate it?
I can also expose the IMAP server itself and see if I can find a mobile app that fits the bill but I'd rather not do that. A webmail client would be much easier to reverse proxy and protect.
I've repurposed a 32 GB M.2 SATA SSD as a bootable "USB stick" and I'm putting useful tools on it. So far I've got memtest, seatools, gparted live, system rescue, clonezilla, and a live install iso of the distro installed on my PC. What other great bootable tools am I sleeping on?
I use multiple workspaces and I open text files all the time.
Once upon a time Mousepad used to behave sanely and would open them in a new tab if there was already an instance on the current workspace, or open a new window (on the current workspace) if there wasn't.
They broke that at some point. Now it's anybody's guess where the file will open. Maybe it opens in a tab in an existing window on this workspace. Maybe in a tab in a window on a random workspace. Maybe a new window on this workspace even though there's one open. I've given up trying to figure it out.
As a last resort I can use wmctrl
to figure out how to open the files and can script a sane launcher myself – provided that the editor has --tab
and --window
options AND lets you specify the window instance. Mousepad has the former but not the latter.
So, do you know any editor that can do it by itself or has those options so I can do it myself? TIA
Hi, I'm trying to find the subtitles for Harmy's "Despecialized" Star Wars remakes and I was wondering if anybody has any ideas. The original website for Project Threepio points at a blog that seems abandoned and an old private tracker (MySpleen) that never opens to public anymore. Even just the English subs would be great (the original pack contained extensive language coverage in DVD format so I was given to understand it was quite large). TIA for any hints.
Upgrading a self-hosted server (3)
- Episode 1: Introduction and plans
- Episode 2: Hardware upgrades and installing Debian stable
- Episode 3: Installing Docker and basic containers (multimedia, files, printing)
A short intro to Docker
Docker is a lot less complicated than it was made out to be.
Docker is a way of taking a service (something like Plex) and making it work in a sort of "slice" cut out of the real machine's resources (CPU, RAM and disk space). These slices are called containers.
There are several benefits:
- If someone breaks into one of your services, they only reach one container not the real machine, and not any of the other containers.
- It's very easy to restore a container in case of machine reinstall, using "magical" recipe files called "docker compose yaml". If the main OS blows up you just need to reinstall stock Debian stable and Docker, then use the magical recipes.
- The containers share similar files among themselves, so if you have 10 containers that use the same files it will only be stored once, not 10 times.
- You can try out any server software without worrying you'll mess up your host machine. Or you can use a second configurations of the same service in a second container without worrying you'll mess up the first one.
Basic Docker commands
docker-compose up -d
: run this into the same dir as a magical yaml file to create a container for the first time.docker stop cups
,docker start cups
,docker restart cups
will stop/start/restart the cups container.docker container list
shows all containers you've created.docker rm cups
removes the cups container (if it's not running).docker image list
shows the software images that the containers are using.docker rmi olbat/cupsd
will remove the olbat/cupsd image, but only if the cups container that is based on it has been removed (and stopped).docker exec cups ls /etc/cups
will execute a command inside the container. You can execute/bin/sh
or/bin/bash
to explore inside the container machine.ctop
is a nice tool that will show you all containers and let you start/stop/restart them.
Preparing for using Docker
There are a couple of things you need to add to a fresh Debian install in order to use Docker:
- docker, obviously, the package on Debian is called
docker.io
. ctop
is a nice CLI tool that shows your containers and lets you do stuff with them (stop, start, restart, enter shell, view logs etc.) It's basically a simple CLI version of Portainer (which I never bothered installing after all).
The following tools are indirectly related to services inside docker containers:
vainfo
will verify that GPU-accelerated video encoding/decoding is working for AMD and Intel GPUs. This will be useful for many media streaming containers. See the Arch wiki for more.avahi
(which isavahi-daemon
on Debian) andavahi-dnsconfd
will help autodiscover some services on LAN between Linux machines. Only applicable if you have more than one Linux machine on your LAN, of course, and it's only relevant to some services (eg. CUPS).
Some tips about Docker
Should you use Docker or Podman? If you're a beginner just use Docker. It's a lot simpler. Yes, there are good reasons to use Podman but you don't need the extra headache when you're starting out. You will be able to transition into Podman easier later.
Use restart: "always"
in your compose yaml's and save yourself unnecessary trouble. Some people try to micromanage their containers and end up writing sysctl scripts for each of them and so on and so forth. With this restart policy your containers will stay stopped if stopped manually, but will start each time the docker daemon [re]starts, which most likely means at boot, which is probably all you want right now.
The one docker issue that will give you the most trouble is mapping users from the real machine to the container machine and back. You want the service in the container to run as a certain user, and maybe you want to give it access to some files or devices on the real machine too. But some docker images were made by people who apparently don't understand how Linux permissions work. A good docker image will let you specify what users and groups it needs to work with (emby/embyserver
is a very good example). A bad image will make up some UID and GID that's completely unrelated to anything on your machine and give you no way to change them; for such images you can try to force them to use root (UID and GID 0) but that negates some of the benefits a container was supposed to give you. So when looking for images see if they have a description, and if it mentions any UID and GID mapping. Otherwise you will probably have a bad time.
How do you find (good) docker images? On hub.docker.com, just search for what you need (eg. "cups"). I suggest sorting images by most recently updated, and have a look at how many downloads and stars it has, too. It's also very helpful if they have a description and instructions.
One last thing before we get to the good stuff. I made a dir on my RAID array, /mnt/array/docker
where I make one subdir for each service (eg. /mnt/array/docker/cups
), where I keep the magical yaml (compose.yaml) for each service, and sometimes I map config files from the container, so they persist even if the container is deleted. I also use git
in those dirs to keep track of the changes to the yaml files.
Using Emby in a Docker container
Emby is a media server that you use to index movies and series and watch them remotely on TV or your phone and tablet. Some other popular alternatives are Plex, Jellyfin and Serviio. See this comparison chart.
Here's the docker-compose.yaml
, explanations below:
version: "2.3"
services:
emby:
image: emby/embyserver
container_name: emby
#runtime: nvidia # for NVIDIA GPUs
#network_mode: host # if you need DLNA or Wake-on-Lan
environment:
- UID=1000 # The UID to run emby as
- GID=100 # The GID to run emby as
- GIDLIST=100,44,105 # extra groups for /dev/dri/* devices
volumes:
- "./data:/config" # emby data dir (note the dot at the start)
- "/mnt/nas/array/multimedia:/mnt/nas/array/multimedia"
ports:
- "8096:8096/tcp" # HTTP port
- "8920:8920/tcp" # HTTPS port
devices:
- "/dev/dri:/dev/dri" # VAAPI/NVDEC/NVENC render nodes
restart: always
- version is the compose yaml specification version. Don't worry about this.
- services and emby defines the service for this container.
- image indicates what image to download from the docker hub.
- container_name will name your container, normally you'd want this to match your service (and for me the dir I put this in).
- runtime is only relevant if you have an Nvidia GPU, for accelerated transcoding. Mine is Intel so... More details on the emby image description.
- network_mode: host will expose the container networking directly to the host machine. In this case you don't need to manually map the ports anymore. As it says, this is only needed for some special stuff like DLNA or WoL (and not even then, I achieve DLNA for example with BubbleUPnP Server without resorting to host mode).
- environment does what I mentioned before. This is a very nicely behaved and well written docker image that not only lets you map the primary UID and GID but also adds a list of extra GUIDs because it knows we need to access
/dev
devices that are owned by 3rd party users likevideo
andrender
. Very nice. - volumes maps dirs or files from the local real machine to the container. The config dir holds everything about Emby (settings, cache, data) so I map it outside of the container to keep it. When I installed this container I pointed it to the location of my old Emby stuff from the previous install and It Just Worked.
- devices similarly maps device files.
- ports maps the network ports that the app is listening on.
- restart remember what I said about this above.
Using Deluge in a Docker container
Let's look at another nicely made Docker image. Deluge is a BitTorrent client, what we put in the Docker container is actually just the server part. The server can deal with the uploads/downloads but needs an UI app to manage it. The UI apps can be installed on your phone for example (I like Transdroid) but the Deluge server also includes a web interface on port 8112.
version: "2.1"
services:
deluge:
image: lscr.io/linuxserver/deluge:latest
container_name: deluge
environment:
- PUID=1000
- PGID=1000
- DELUGE_LOGLEVEL=error
volumes:
- "./config:/config" # mind the dot at the start
- "/mnt/nas/array/deluge:/downloads"
ports:
- "8112:8112/tcp" # web UI
- "60000:60000/tcp" # BT transfers
- "60000:60000/udp" # BT transfers
- "58846:58846/tcp" # daemon remote control (for Transdroid)
restart: always
Most of this is covered above with Emby so I won't repeat everything, just the important distinctions:
- Notice how environment lets you choose what UID and GUID to work as.
- I use volumes to map out the dir with the actual downloads, as well as map all the Deluge config dir locally so I can save it across container resets/reinstalls.
- The ports need to be defined in the deluge config (which you can do via the web UI or edit the config directly) before you map them here. IIRC these are the defaults but please check.
Using Navidrome in a Docker container
Navidrome is a music indexer and streaming server (sort of like your own Spotify). It's follows the Subsonic spec so any client app that works with Subsonic will work with Navidrome (I like Substreamer). It also includes a web UI.
version: "3"
services:
navidrome:
image: deluan/navidrome:latest
container_name: navidrome
environment:
ND_SCANSCHEDULE: 1h
ND_LOGLEVEL: info
ND_BASEURL: ""
ND_PORT: 4533
ND_DATAFOLDER: /data
ND_MUSICFOLDER: /music
volumes:
- "./data:/data"
- "/mnt/nas/array/music:/music:ro"
ports:
- "4533:4533/tcp"
restart: "always"
Again, mostly self-explanatory:
- Environment settings are nice but this image stopped short of allowing UID customization and just said fuck it and ran as root by default. Nothing to do here, other than go look for a nicer image.
- I mapped the data dir locally so I preserve it between resets, and the music is shared read-only.
Using BubbleUPnPServer in a Docker container
This server can do some interesting things. Its bread and butter is DLNA. It has a companion Android app called, you guessed it, BubbleUPnP, which acts as a DLNA controller. The server part here can do local transcoding so the Android phone doesn't have to (subject to some caveats, for example the phone, the DLNA source and the Bubble server need to be on the same LAN; and it can only transcode one stream at a time).
It can also identify media providers (like Emby or Plex) on the LAN and media renderers (like Chromecast or Home Mini speaker) and DLNA-enables them so they appear in the Bubble app as well as on other DLNA-aware devices.
version: "3.3"
services:
deluge:
image: bubblesoftapps/bubbleupnpserver-openj9-leap
container_name: bubbleupnpserver
network_mode: "host"
user: "0:0"
devices:
- "/dev/dri:/dev/dri:rw"
volumes:
- "./data/configuration.xml:/opt/bubbleupnpserver/configuration.xml:rw"
restart: "always"
- network_mode is "host" because this server needs to interact with lots of things on the LAN automagically.
- user forces the server to run as root. The image uses a completely made up UID and GID, there's no way to customize it, and it needs to access
/dev/dri
which are restricted tovideo
andrender
groups to access GPU-accelerated transcoding. So using root is the only solution here (short of looking for a nicer image). - I map the configuration file outside the container so it's saved across reset/reinstalls.
Using Samba in a Docker container
Normally I'd install samba on the host machine but Debian wanted me to install like 30 packages for it so I think that's a valid reason to use a container.
version: "2.3"
services:
samba:
image: twistify/anonymous-samba
container_name: samba
volumes:
- "./etc/samba:/etc/samba:ro"
- "/mnt/nas/array:/mnt/nas/array"
ports:
- "445:445/tcp" # SMB
- "139:139/tcp" # NetBIOS
restart: "always"
Normally this should be a simple enough setup, and it is simple as far as docker is concerned. Map some ports, map the config files, map the array so you can give out shares, done. But the image doesn't offer UID customization and just runs as root.
For reference I give the /etc/samba/smb.conf
here too because I know it's tricky. This one only offers anonymous read-only shares, which mainly worked out of the box (hence why I stuck to this image in spite of the root thing).
[global]
workgroup = WORKGROUP
log file = /dev/stdout
security = user
map to guest = Bad User
log level = 2
browseable = yes
read only = yes
create mask = 666
directory mask = 555
guest ok = yes
guest only = yes
force user = root
[iso]
path=/mnt/nas/multimedia/iso
You can add your own shares aside from [iso], as long as the paths are mapped in the yaml.
Notice the ugly use of root in the Samba config too.
Using CUPS inside a Docker container
CUPS is a printer server, which I need because my printer is connected via USB to the server and I want to be able to print from my desktop machine.
version: "2.3"
services:
cups:
image: aguslr/cups:latest
container_name: cups
privileged: "yes"
environment:
- CUPS_USER=admin
- CUPS_PASS=admin
volumes:
- "/dev/bus/usb:/dev/bus/usb" # keep this under volumes, not devices
- "/run/dbus:/run/dbus"
ports:
- "631:631/tcp" # CUPS
restart: "always"
The docker setup is not terribly complicated if you overlook things like /dev/bus/usb
needing to be a volume mapping not a device mapping, or the privileged mode.
CUPS is complicated because it's a complex beast, so I'll try to add some pointers below (mostly unrelated to docker):
- You can use
lpstat -p
inside the host to check if CUPS know about your printer, and/usr/lib/cups/backend/usb
to check if it knows about the USB printer in particular. - You need CUPS on both the server and the desktop machine you want to print from. You need to add the printer on both of them. The CUPS interface will be at :631 on both of them, for printer management on the server the user+pass is admin:admin as you can see above, on the desktop machine God only knows (typically "root" and its password, or the password of the main user).
- So the server CUPS will probably detect the USB printer and have drivers for it, this image did for mine (after I figured out the USB bus snafu). You need to mark the printer as shared!
- ...but in order for the desktop machine to detect the printer you need to do one more thing: install Avahi daemon and dnsconfd packages on both machines because that's the stuff that actually makes it easy for the desktop machine to autodetect the remote printer.
- ...and don't rely on the drivers from the server, the desktop machine needs its own drivers, which it may or may not have. For my printer (Brother HL-2030) I had to install an AUR package on desktop – and then the driver showed up when setting up the printer in the desktop CUPS.
See you next time with more docker recipes! As usual any and all comments and suggestions are welcome, including "omg you're so dumb, that thing could be done easier like this".
Upgrading a self-hosted server (2)
- Episode 1: Introduction and plans
- Episode 2: Hardware upgrades and installing Debian stable
- Episode 3: Installing Docker and basic containers (multimedia, files, printing)
Adding a secondary disk to the machine
I'd like to have the old system around while tinkering with the new one, just in case something goes south. Also the old system is full of config files and scripts that are still useful.
I was planning to use a spare SSD I had lying around but it was a bit more involved than I'd expected. The machine has two M.2 slots with the old system disk occupying one of them, and 6 SATA ports on the motherboard, being used by the 6 HDDs. The spare SSD would need a 7th SATA port.
I could go get another M.2 but filling the second M.2 takes away one SATA channel, so I would be back to being one port short. 🤦
The solution was a PCI SATA expansion card which I happened to have around. Alternatively I could've disconnected one of the RAID arrays and free up some SATA ports that way.
Taking a system backup
So at this point I finally have two usable SSDs, one of which has the current system on it and is bootable.
What I'm proposing to do is make a 1-to-1 copy to the spare SSD and make it bootable too, then install Debian to the main SSD (the M.2).
It's simple because I used a single partition for the old system, so there are no multiple partitions for things like /home, /var, /tmp, swap etc.
- Used
fdisk
to wipe the partition table on the backup SSD and create one primary Linux partition across the whole disk. In fdisk that basically means hitting Enter-Enter-Enter and accepting all defaults. - Used mkfs.ext4 -m5 to create an Ext4 filesystem on the backup SSD.
- Mount the backup SSD partition and use
cp -avx
to copy the root filesystem to it.
I've seen many people recommend dd
or clonezilla for the copy but that also duplicates the block ID, which you then need to change or there would be trouble. Others go for rsync
or piping through tar
but a simple cp -ax
is perfectly fine for this.
Making the backup disk bootable
- Used
blkid
to find the UUID of the backup SSD partition and change it in the backup's/etc/fstab
. - If you have others partitions like /home, /var etc. you would do the same for each of them.
- For swap I happen to use one that needs no special handling. It's a
/swapfile
in the root partition which I created withdd
, formatted withmkswap
, and mounted with/swapfile swap swap defaults 0 0
in/etc/fstab
. That file was simply copied bycp
so there's nothing else needed.
Next is installing grub
on the backup SSD. You need to chroot into the SSD for this one as well as mount --bind
/dev
, /sys
and /proc
.
Here's an example for that last point, taken from this nice reddit post:
# mkdir /mnt/chroot
# mount /dev/SDD-partition-1 /mnt/chroot
# mount --bind /dev /mnt/chroot/dev
# mount --bind /proc /mnt/chroot/proc
# mount --bind /sys /mnt/chroot/sys
# mount --bind /tmp /mnt/chroot/tmp
# chroot /mnt/chroot
// Verify that `/etc/grub.d/30-os_prober` or similar is installed and executable
# update-grub
# grub-install /dev/SDD-whole-disk
# update-initramfs -u
I verified that I could actually boot into the backup disk before proceeding.
Installing Debian stable on the main disk
(I've decided to go with a regular install rather than debootstrap
after all.)
Grabbed an amd64 ISO off Debian's website and put it on a flash stick. I used the graphical gnome-disk-utility
app for that but you can also do dd bs=4M if=image.iso of=/dev/stick-device
. Usual warnings apply – make sure it's the right disk, umount any pre-existing flash partition first etc.
Booting the flash stick should have been uneventful but the machine would not see it in BIOS or in the quick-boot BIOS menu so I had to poke around and disable some kind of secure feature (which will probably be different on your BIOS so good luck with that).
During the install I selected the usual things like keymap, timezone, the disk to install to (the M.2, not the SSD backup with the old system), chose to use the whole disk in one partition as before, created a user, disallowed login as root, and requested explicit installation of a SSH server. Networking works via DHCP so I didn't need to configure it.
First access
SSH'd into the machine using user + password, copied the public SSH key from my desktop machine into the Debian's ~/.ssh/authorized_keys
, and then disabled password logins in /etc/ssh/sshd_config
and service ssh restart
. Made sure I could login with public key before disconnecting that root session.
Some other things I installed directly on the OS: ntpdate
, joe
, mc
, apt-file
, net-tools
, htop
, vainfo
, curl
, smartmontools
, hdparm
, rsync
.
Mounting RAID arrays
The RAID arrays are MD (the Linux software driver) so they should have been already detected by the Linux kernel. A quick look at /proc/mdstat
and /etc/mdadm/mdadm.conf
confirms that the arrays have indeed been detected and configured and are running fine.
All that's left is to mount the arrays. After creating /mnt
directories I added them to /etc/fstab
with entries such as this:
UUID=array-uuid-here /mnt/nas/array ext4 rw,nosuid,nodev 0 0
...and then systemctl daemon-reload
to pick up the new fstab right away, followed by a mount -a
as root to mount the arrays.
Publishing the arrays over NFS
Last step in restoring basic functionality to my LAN is to publish the mounted arrays over NFS. My desktop machine can function fine without NFS but it's nice to have all the arrays available. I used nfs-kernel-server
for this.
Please note that Debian and Ubuntu have a legacy issue with NFS where they fail to mount it after reboot. According to this discussion the most reliable solution is to make the service explicitly dependent on rpcbind by creating /etc/systemd/system/nfs-kernel-server.service.d/10-dep.conf
with the following content:
[Unit]
Requires=rpcbind.service
After=rpcbind.service
To publish the arrays over NFS you add them to /etc/exports
with entries such as this:
/mnt/nas/array desktop.lan(rw,async,secure,no_subtree_check,mp,no_root_squash)
Please note that the exports have to be done towards a client machine explicitly, either by name or IP. After a service nfs-kernel-server restart
the NFS shares are ready for use.
Now on the client machine side you would most likely install nfs-utils
and define the NFS shares in /etc/fstab
like this:
nas:/mnt/nas/array /mnt/nas/array nfs vers=4,rw,hard,intr,noatime,timeo=10,retrans=2,retry=0,rsize=1048576,wsize=1048576 0 0
The first one (with nas: prefix) is the remote dir, the second is the local dir. I usually mirror the locations on the server and clients but you can of course use different ones.
Goals for the next episode
In the next episode I will attempt to install something non-essential, like Emby or Deluge, in a docker container. I intend to keep the system installed on the metal very basic, basically just ssh, nfs and docker over the barebones Debian install. Everything else should go into docker containers.
When working with docker I'd like to:
- Keep the docker images on the system disk but all configurations on a RAID array.
- Map all file access to a RAID array and network ports to the host. This includes things like databases and other persistent files, as long as they're important and not just cache or runtime data.
Basically the idea is that if I ever lose the system disk I should be able to simply reinstall a barebones Debian and redo the containers using the stored configs, and all the important mutable files would be on RAID.
See you next time, and meanwhile I appreciate any comments about what I could've done better as well as suggestions for next steps!
I need a very simple method for non-advanced users to share each other's screen explicitly when they need help. They're running XFCE on Manjaro and the machines involved are using Tailscale. Edit: SSH access is also available, with key authentication.
I need something super simple because they are remote from me and from each other and any graphical setup will have to be assisted sight-unseen over phone. So ideally just (1) install something (which I can do for them over SSH), (2) pick something from the Applications menu and maybe (3) press a big "START" button.
It's also ok-ish if the remote capability is present all the time and I can connect without their explicit permission, but you can see why it would be best if they did something to enable it...
I've been looking for a solution but all I find is stuff that's way too complicated OR starts a new desktop session instead of showing the current one.
Edited: to clarify I'm not the one who will be remoting-in and to mention SSH is available.
TIA
I've been using Gandi for over 20 years, almost since it was founded. Since being acquired in 2019 by Montefiore Investment and this year by Total Webhosting Solutions their service have become more and more expensive and have finally priced me out.
For context, I administer a bunch of domains, mailboxes and HTML websites for my family and extended family, and I prefer services hosted in the EU because of GDPR and local availability.
This post is meant as a list of practical decisions in 2023 for the small time selfhoster. If anybody wants to comment on what Gandi (or rather TWS) is doing feel free to do so in the comments, I'm curious myself.
Prices I've mentioned use my country's VAT so will vary slightly for you.
Domain names
Domain names have always been a bit on the expensive side with Gandi but they used to include a lot of features for free with them (SSL, DNSSEC, mailboxes, a small static website, WHOIS privacy, local contact for TLDs that need it etc.) and what they added extra was proportional to the base TLD cost.
For the next renewal all my domains were slated to jump to €28 across the board. If you have domains with Gandi try adding some renewals to the cart and check in advance.
I had to look for an European registrar because I have lots of European ccTLDs that the usual suspects like Cloudflare and Porkbun don't support.
I'm moving to INWX.de and will be saving 25-60% per domain. This takes into account WHOIS privacy where needed for an extra 5€/domain (EU ccTLDs are private due to GDPR but we own a couple of TLDs too) as well as local contact services where required (price varies by country).
I manage multiple mailboxes but they have low traffic and low storage requirements. Gandi will be offering them at €55/mailbox/year. I'm not questioning their pricing, 3-4€/month for email is common, but typically charged by email-focused services.
Anyway, this per-mailbox model would price us into hundreds of euros for resources that go 99% unused. I'm switching to Migadu.com, who allows unlimited domains and mailboxes (within common sense) under a single account and charges for the conflated storage space and emails sent/received across all mailboxes.
Migadu tiers start at 20€/year for 5GB and 200/20/day (soft limits).
Webhosting
We were using Gandi's smallest hosting package for about 100€/year, which was slated to jump to €135. Not an outlandish price for your typical PHP + MySQL hosting, especially since it had some VPS-like features. Then again the typical webhosting service would include a couple of mailboxes and some other goodies.
This was a good opportunity for us to reevaluate out hosting needs and realize we can ditch PHP+MySQL (if we really have to revisit it we'll consider VPS offers in the future). It's mostly static sites, image galleries and a bit of blogging. We've cached all our stuff as plain HTML/CSS/images and moved it to BunnyCDN.
Bunny lets you define a file bundle, gives you FTP access with a unique username+password, lets you pick the extent of replication, puts a CDN on top of it, and lets you point a domain name to it. Also throws a bunch of web server-ish features on top like rules/rewrites and Let's Encrypt SSL.
They actually offer more features than that but I've just mentioned the minimum you need for serving a bunch of static websites.
Bunny pricing starts at $0.01/GB (with a minimum of $1/month) and you pay as you go.
Nameservers
Since we're doing this I've taken the opportunity to dab into DNS. Turns out it's not that hard. There's only like half a dozen of commonly used DNS record types and everybody's helping you with them – email services like Migadu generate the email-related ones for you, registrars and managed DNS services generate the SOA for you, they have forms that tell you what fields are needed etc.
There are lots of managed DNS options. Registrars usually include nameservers and let you mess with the records so INWX was one choice. Bunny offers DNS service that integrates with their CDN. deSEC is a completely free service I'll be using as backup.
All of the above also offer APIs so a bash script will be taking care of dynamic DNS.
Upgrading a self-hosted server (1)
- Episode 1: Introduction and plans
- Episode 2: Hardware upgrades and installing Debian stable
- Episode 3: Installing Docker and basic containers (multimedia, files, printing)
Welcome
Hi, I'm starting a series of posts that will follow the upgrades I'll be doing to a self-hosted machine that serves as NAS and also runs all kinds of self-hosted software. I'm lazy so it will probably take time, don't expect me to post too often.
About me: I've been using Linux exclusively for personal use (both desktop and servers) for about 20 years now. I've used several distributions over the years, I've built my own stuff from source (including kernels) and I've done Linux From Scratch. I'm not a Linux expert or professional sysadmin but I know my way around it, and I can learn what I don't know. So don't be afraid to make any suggestions no matter how complicated.
The current state of the machine
- It's a PC using an i5 7400 CPU, has a built-in GPU with support for h264 hardware encoding and MPEG2, VP8, VP9 and HEVC hardware decoding (this will come in handy for video transcoding).
- Only 4 GB of RAM, I have ordered a dual 2x16 GB kit.
- The system drive is a Transcend M.2 SSD (32 GB). SATA rather than PCIe unfortunately but it will do fine for the time being.
- The OS is Ubuntu Server 16.04 LTS using Expanded Security Maintenance for updates.
- It's currently running SSH, NFS, Samba, CUPS, OpenVPN, Emby and Deluge on bare metal. Some of them come from distro packages, some from binary releases straight from the developer.
- There are 6 HDDs forming 3 pairs of RAID 1 arrays. 6 drives was a limit I chose from the beginning, and the case and motherboard were chosen accordingly (cage for 6 drives and 6 SATA connectors).
- My ISP provides a public dynamic IP and allows port forwards.
- I have a router that I've recently upgraded to the latest OpenWRT so it also runs Linux, can install packages, it has a web admin interface etc. and can do some interesting stuff.
What I'd like to do
- Increase the RAM to 32 GB.
- Stick with a Linux distro, as opposed to a NAS-tailored OS, Unraid etc.
- Install Debian Stable on a SSD, most likely via debootstrap from the Ubuntu system.
- Add a GRUB menu entry that makes a passthrough to the other system, so I can keep them both around for a while.
- Use
docker-compose
and possibly Portainer for as many of the services as it makes sense. Not sure if it's worth bothering to make containers for things like SSH, NFS, Samba. - Add more services. I'd like to try Jellyfin, NextCloud and other stuff (trying to degoogle for example).
- I'd like to find a better solution for accessing services from outside the LAN. Currently using OpenVPN which is nice for individual devices but gets complicated when you want an entire remote LAN to be able to access (to allow smart TVs or Chromecast to use Emby/Jellyfin for example). I'm hoping Authelia + reverse proxy will be able to help with this.
What I'm not interested in
- Not interested in using Plex. I've used it for a couple of years, it's a fine piece of software but I don't like the fact they now mandate access through their server or injecting ads.
- Not interested in changing the filesystem or the RAID setup for the HDDs. RAID 1 pairs give me enough redundancy. The HDD upgrades are very simple. I'm fine with losing 50% of capacity.
Any and all suggestions and comments are welcome! Even if they're about things I said I'm not interested in. It's always possible there are things I haven't considered.
You don't have to install drivers or CUPS on client devices. Linux and Android support IPP out of the box. Just make sure your CUPS on the server is multicasting to the LAN.
You may need to install Avahi on the server if it's not already (that's what does the actual multicasting). The printer(s) should then auto magically appear in the print dialogs on apps on Linux clients and in the printer service on Android.
On Linux it may take a few seconds to appear after you turn it on and may not appear when it's off. On Android it shows up anyways as long as the CUPS server is on.